The
Newest Technology NOVATEC BREAKTHROUGH!
Novatec, Inc. Introduces Novadryer
The
Newest Technology
Breakthrough in Dryers
Since Desiccant.
"This is a dramatic breakthrough that will re-define how the industry views dryers," said John W. Doub, Jr., Executive Vice President of Novatec. "I've been selling dryers since 1966 and haven't seen an improvement to dryer technology this significant in that time."
No Moving Parts! No Desiccant! Minus 40 degree dew point regardless of compressed air quality! Instant on with a minus 40 Dew Point ! No more waiting 4 hours for your desiccant to charge.
Introducing the "Big Shot" - Novatec's New Large Shot, High Capacity, JIT Vacuum Chamber Discharge Unit!
Improve
Inventory Control, Convert Existing Systems to JIT!
Baltimore, MD - Novatec introduced its latest innovation in technology at NPE 2000. The "Big Shot", a large shot, high capacity JIT Vacuum Chamber discharge is the newest addition to Novatec's material conveying solutions line. This new product does what no other JIT discharge has done before: it provides large injection molding machine users the opportunity to use a system with a high capacity, high volume JIT set-up.
Novatec has launched the "Big Shot" as a solution for minimizing inventory as well as spillage. A vacuum chamber is mounted to a six, ten, or fifteen pound capacity polycarbonate sight tube, with a high temperature molded cone bottom. Adjustable photo eye sensors for the load signal reduces material storage at the throat of the machine, reducing inventory costs. The "Big Shot" mounts to a slide plate that moves off of the machine throat for quick access and clean-out during material changes.
Convert any existing standard system to a JIT system with the "Big Shot" - you can update your equipment simply by combining the "Big Shot" technology with your current system!
The "Big Shot" is rugged, with heavy duty machined construction and a powder coated finish. The "Big Shot" can accommodate vacuum chambers in a wide range of sizes.
Novatec, Inc. is a worldwide supplier of quality auxiliary equipment to the plastics industry and provides custom solutions to drying, blending and pneumatic conveying requirements. Novatec offers worldwide service, full system start-ups and complete turnkey installation for all of its products. All Novatec products are manufactured in the USA at the company's world headquarters in Baltimore, Maryland and are backed with a standard two-year warranty.
Baltimore,
MD - Novatec's new Micro Auger Feeder is the perfect solution for processors
requiring additive feed rates of 7.5 pounds-per-hour or less. The compact Micro
Auger Feeder takes up less of a footprint than traditional auger feeders and
measures only 15.5" long and 14" high. Its programmable controls allow
for variable screw speeds from 0 - 125 rpms to provide greater control of
expensive additives while reducing waste. Its 6 pound capacity Feed Hopper as
well as the unit's motor are held in place with magnetic contacts and locator
pins that allow for quick and easy disassembly for changeover and cleanout.
Novatec is a worldwide supplier of quality auxiliary equipment to the plastics industry and provides custom solutions to drying, blending and pneumatic conveying requirements. Novatec offers worldwide service, full system start-ups and complete turnkey installation for all of its products. All Novatec products are manufactured in the USA at the company's world headquarters in Baltimore, Maryland and are backed with a standard two-year warranty.
Now Processors Can Prevent Over-Drying and Control the Moisture Content of Their Resins!
BALTIMORE, MD-Novatec introduces a breakthrough in the ability to control the dew point to assure precision dryness and part flexibility when desired. Latest research indicates certain polyamides, such as Nylon 6 and 6.6, and some polyesters can be over-dried for some applications.
The New Moisture Manager Dryers provide special dew point monitoring and the ability to operate at pre-set moisture levels, removing excess moisture without over-drying. Moisture Manager Dryers are designed with dew point sensors to monitor dryer dew point and material dryness and signal a change in process air flow according to dew point. The dryers feature Novatec's MCD-3000 multi-system controller, which incorporates a backlit LCD display with continuous monitoring of the dew point, dew point changeover, and dryer alarms. The Moisture Manager Dryers are available in a range of capacities and either in electric or indirect, gas-fired configurations.
The Moisture Manager System can be applied to central dehumidifying systems, delivering unheated, dew point air to one or several remote heater/blowers equipped with Moisture Managers, on one or several drying hoppers, each with an individually set drying temperature and dew point control. Novatec Central Dry Air Conveying Systems can be supplied with a central Moisture Manager Dryer, utilizing dry, heated air as the conveying medium to distribute materials to one or more machines.
Novatec, Inc. is a leading supplier of material blending, drying and pneumatic conveying systems to the plastics industry. The company manufactures a full complement of dryers, loading equipment and blenders and specializes in providing custom system solutions to meet specific process and production requirements.
|
|
|||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||
|
|||||||||||||
Take
the worry out of designing your conveying systems - Novatec
provides complete layout, design, and installation, including
both underground and overhead conveying lines! Novatec's
Material Handling Systems range from rail car unloading to
in-plant conveying to process machines, including silos and
intermediate surge bins with touch screen computer controls.
Novatec's Material Handling Systems are engineered and built to
provide years of reliable service and provide solutions for
either vacuum or pressure conveying of plastic resins.
Completely automated conveying systems are centrally controlled
by advanced microprocessor or PLC-based controllers. Novatec can
design a system to meet your specific handling requirements
regardless of capacity. A centralized system has many
advantages:
DRYING
SYSTEMS FOR THE PLASTICS INDUSTRY
